id0902i7403300
| DESCRIPTION |
Auto leveling system initialization error |
|---|---|
|
DETECTION CONDITION
|
• Auto leveling system initialization has not been completed.
|
|
POSSIBLE CAUSE
|
• Auto leveling system initialization error
• Auto leveling control module malfunction
|
Diagnostic Procedure
| STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
PERFORM AUTO LEVELING SYSTEM INITIALIZATION
• Perform the “AUTO LEVELING SYSTEM INITIALIZATION”. (See
AUTO LEVELING SYSTEM INITIALIZATION.)
• Turn the ignition switch to the ON position.
• Perform the “DTC INSPECTION”. (See
DTC INSPECTION [HEADLIGHT AUTO LEVELING SYSTEM].)
• Is the same DTC present?
|
Yes
|
Perform the “AUTO LEVELING SYSTEM INITIALIZATION” again, then go to the next step.
|
|
No
|
Go to Step 3.
|
||
|
2
|
VERIFY TROUBLESHOOTING COMPLETED
• Turn the ignition switch to the ON position.
• Perform the “DTC INSPECTION”. (See
DTC INSPECTION [HEADLIGHT AUTO LEVELING SYSTEM].)
• Is the same DTC present?
|
Yes
|
Replace the auto leveling control module, then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
3
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||