id0902z2888300
| DESCRIPTION |
Rear vehicle monitoring control module (RH) malfunction |
|---|---|
|
DETECTION CONDITION
|
U3000:43
• Rear vehicle monitoring control module (RH) external RAM malfunction.
U3000:44
• Rear vehicle monitoring control module (RH) internal RAM malfunction.
U3000:45
• Rear vehicle monitoring control module (RH) internal ROM malfunction.
U3000:46
• Rear vehicle monitoring control module (RH) internal EEPROM malfunction.
U3000:47
• Rear vehicle monitoring control module (RH) external check system malfunction.
U3000:48
• Rear vehicle monitoring control module (RH) communication circuit malfunction.
U3000:49
• Rear vehicle monitoring control module (RH) voltage control circuit malfunction.
U3000:96
• Rear vehicle monitoring control module (RH) internal circuit malfunction.
|
|
POSSIBLE CAUSE
|
• Rear vehicle monitoring control module (RH) malfunction
|
Diagnostic Procedure
| STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
VERIFY REAR VEHICLE MONITORING CONTROL MODULE (RH) MALFUNCTION
• Clear the DTC from the rear vehicle monitoring control module using the M-MDS. (See
CLEARING DTC [REAR VEHICLE MONITORING SYSTEM].)
• Turn the ignition switch to the ON position.
• Perform the “DTC INSPECTION” to confirm the rear vehicle monitoring system DTC using the M-MDS. (See
DTC INSPECTION [REAR VEHICLE MONITORING SYSTEM].)
• Is the same DTC present?
|
Yes
|
Replace the rear vehicle monitoring control module (RH), then go to the next step.
|
|
No
|
Go to the next step.
|
||
|
2
|
VERIFY THAT NO OTHER DTCs ARE PRESENT
• Are any DTCs present?
|
Yes
|
Go to the applicable DTC inspection.
|
|
No
|
DTC troubleshooting completed.
|
||