NO.6 NO VOICE NAVIGATION [CAR-NAVIGATION SYSTEM]

NO.6 NO VOICE NAVIGATION [CAR-NAVIGATION SYSTEM]SM2446140

id0903e8910500

6	No voice navigation.
POSSIBLE CAUSE	• Improper adjustment of the navigation voice volume • Car-navigation unit malfunction • Poor connection of front door speaker connector, terminal damage • Front door speaker malfunction • Poor connection of car-navigation unit connector, terminal damage • Open or short circuit in wiring harness between car-navigation unit and front door speaker through audio amplifier. • Poor connection of audio amplifier connector, terminal damage

No voice navigation.

POSSIBLE CAUSE

• Improper adjustment of the navigation voice volume

• Car-navigation unit malfunction

• Poor connection of front door speaker connector, terminal damage

• Front door speaker malfunction

• Poor connection of car-navigation unit connector, terminal damage

• Open or short circuit in wiring harness between car-navigation unit and front door speaker through audio amplifier.

• Poor connection of audio amplifier connector, terminal damage

Diagnostic procedure

STEP	INSPECTION		ACTION
1	• Is the voice navigation mute?	Yes	Go to the next step.
1	• Is the voice navigation mute?	No	Turn on the voice navigation.
2	• Turn the audio power switch (CD, radio) to ON. • Does the front speaker work?	Yes	Go to Step 6.
2		No	Go to the next step.
3	• Turn the ignition switch to LOCK position. • Remove the front door speaker. (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION.) • Is front door speaker securely connected?	Yes	Go to the next step.
3		No	Securely connect the front door speaker connector.
4	• Disconnect the front door speaker connector (2-pin). • Inspect both the front door speaker and wiring harness-side connector for poor connection (such as damaged/pulled out pins, corrosion). • Are all the pins normal?	Yes	Go to the next step.
4		No	If the front door speaker connector is wrong: • Replace the front door speaker. (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION.) If the wiring harness-side connector is wrong: • Repair or replace the pins and/or the connector.
5	• Inspect the front door speaker. (See FRONT DOOR SPEAKER INSPECTION.) • Is it normal?	Yes	Go to the next step.
5		No	Replace the front door speaker. (See FRONT DOOR SPEAKER REMOVAL/INSTALLATION.)
6	• Inspect the connection of car-navigation unit connector (24-pin). • Is the connector securely connected?	Yes	Go to the next step.
6		No	Securely connect the car-navigation unit connector.
7	• Disconnect the car-navigation unit connector (24-pin). • Inspect both the car-navigation unit and wiring harness-side connector for poor connection (such as damaged/pulled out pins, corrosion). • Are all pins normal?	Yes	Go to the next step.
7		No	If the car-navigation unit connector is wrong: • Replace the car-navigation unit. (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.) If the wiring harness-side connector is wrong: • Repair or replace the pins and/or the connector.
8	• Inspect the continuity between the following terminals: ― Car-navigation unit terminal 3O (NAVI+) — audio amplifier terminal 1H ― Car-navigation unit terminal 3P (NAVI-) — audio amplifier terminal 1G • Is there continuity?	Yes	Go to the next step.
8		No	• Repair or replace the related wiring harness between the audio amplifier and the car-navigation unit. • Then go to the next step.
9	• Inspect the connection of the audio amplifier connector. • Is the connector connected securely?	Yes	Go to the next step.
9		No	Securely connect the audio amplifier.
10	• Turn the ignition switch to LOCK position. • Disconnect the audio amplifier connector. • Inspect the continuity between the following terminals: ― Audio amplifier terminal 2N — front door speaker (LH-) terminal A ― Audio amplifier terminal 2L — front door speaker (LH+) terminal B ― Audio amplifier terminal 2M — front door speaker (RH-) terminal A ― Audio amplifier terminal 2K — front door speaker (RH+) terminal B • Is there continuity?	Yes	Troubleshooting is completed.
10		No	Repair or replace the related wiring harness.