id0903h3910000
| 7 |
Display screen does not change to the night mode (Front and rear combination lights operate normally.) |
|---|---|
|
POSSIBLE CAUSE
|
• Improper setting of navigation map color indication
• Improper TNS signal (signal from BCM)
• Poor connection of the multi information display connector, terminal damage
• Multi information display malfunction
|
Diagnostic procedure
| STEP |
INSPECTION |
ACTION |
|
|---|---|---|---|
|
1
|
• Turn the ignition switch to ON position.
• Does the display screen change to the night mode when the light switch is turned to the TNS position, and the dimmer cancel switch is turned to OFF?
|
Yes
|
The system is normal.
|
|
No
|
Go to the next step.
|
||
|
2
|
• Press the “MENU” button.
• Select “Navigation Set Up”.
• Select “Map Color”.
• Is the “MAP Color” set to “Auto”?
|
Yes
|
Go to the next step.
|
|
No
|
System is normal.
Set the “MAP Color” to “Auto”.
|
||
|
3
|
• Perform the check code 4 of the “MULTI INFORMATION DISPLAY INPUT/OUTPUT CHECK MODE”. (See
MULTI INFORMATION DISPLAY INPUT/OUTPUT CHECK MODE.)
• Is the check result normal?
|
Yes
|
Go to the next step.
|
|
No
|
Repair or replace malfunctioning part according to inspection result.
|
||
|
4
|
• Does system work properly?
|
Yes
|
Troubleshooting is completed.
|
|
No
|
Replace the multi information display.
|
||