id091200001400

Front Power Window Motor

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION.)

(2)Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

3.Remove the bolts.

acxuuw00003690

4.Remove the front power window motor from the power window regulator.

5.Disconnect the power window motor connector.

6.Install in the reverse order of removal.

Note

• When installing the front power window motor to the front power window regulator drum, the drum housing hooks may detach from the door module. If this happens, remove the front door speaker, insert your hand in the speaker installation hole, connect the drum housing hooks, and while supporting the drum housing, install the front power window motor to the drum.

Rear Power Window Motor

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)Sail garnish (See SAIL GARNISH REMOVAL/INSTALLATION.)

(2)Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

3.Remove the bolts.

acxuuw00003691

4.Remove the rear power window motor from the power window regulator.

5.Disconnect the rear power window motor connector.

6.Install in the reverse order of removal.

Note

• When installing the rear power window motor to the rear power window regulator drum, the drum housing hooks may detach from the door module. If this happens, remove the door speaker, insert your hand in the speaker installation hole, connect the drum housing hooks, and while supporting the drum housing, install the rear power window motor to the drum.