id091200002900

1.Connect the heated outer mirror connectors. (Vehicles with heated outer mirrors)

acxuuw00004119

2.Connect the RVM warning indicator light connector. (Vehicles with rear vehicle monitoring system)

Note

• Lightly pull the RVM warning indicator light connector and verify that the RVM warning indicator light housing cannot be pulled off. If the connection is poor, insert a tape-wrapped flathead screwdriver into position A shown in the figure and engage the connector.

acxwzw00000577

3.Press part A on the outer mirror glass and install pin A.

acxuuw00004041

4.Press part B on the outer mirror glass and install pins B.