id091300487800

1.Turn the ignition switch to the LOCK position.

2.Disconnect the negative battery cable and wait 1 min or more.

3.Remove the front seat. (See FRONT SEAT REMOVAL/INSTALLATION.)

4.Remove the front seat side cover. (See FRONT SEAT SIDE COVER REMOVAL/INSTALLATION.)

5.Remove the front seat front cover. (See FRONT SEAT FRONT COVER REMOVAL/INSTALLATION.)

6.Disconnect the seat warmer connector.

7.Cut the band securing the seat warmer module wiring harness.

acxwzw00001518

8.Remove the bolts then remove the front seat cushion component.

acxuuw00004064

9.Detach hook A.

acxuuw00004065

10.Detach hook B and C in the direction of the arrow shown in the figure.

acxuuw00004066

11.Detach hook D in the direction of the arrow shown in the figure then remove the front seat cushion trim and front seat cushion pad as a single unit from the front seat cushion frame.

acxuuw00004067

12.Remove rings C and velcro in the order of (1), (2), and (3) as shown in the figure, then remove the seat cushion trim from the seat cushion pad in the direction of the arrow shown in the figure.

acxuuw00004068

13.Install in the reverse order of removal.