PERSONALIZATION FEATURES SETTING PROCEDURE

PERSONALIZATION FEATURES SETTING PROCEDURESM2446270

id091400107200

Advanced Keyless Entry And Start System

Note

• Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the CUSTOMIZED FUNCTION SETTING PROCEDURE.

1.Connect the M-MDS to the DLC-2.

acxuuw00003252

2.After the vehicle is identified, select the following items from the initial screen of the M-MDS.

1. Select “Module Programming”.

3.Then, select items from the screen menu in the following order.

1. Select “Programmable Parameters”.

2. Select “RKE”.

4.Select the item name, and then select option.

Mazda Modular Diagnostic System (M-MDS) display	Function	Initial setting	Setting content	Control unit
Card Key Battery Low Warning	Card key remaining battery level/battery dead warning can be set.	Enabled	Disabled/ Enabled	Keyless control module
Answer Back Buzzer	Answer back buzzer function can be set.	Enabled	Disabled/ Enabled	Keyless control module
Automatic Locks	Automatic locks function can be set.	Disabled	Disabled/ Enabled	Keyless control module
Auto relock timer (with AKE)	Auto re-lock operation timing can be changed.	30s	30s/ 60s/ 90s	Keyless control module

Keyless Entry Start System

• For the keyless entry system, refer to the control system personalization features setting. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.)

Theft-deterrent System

• For the theft-deterrent system, refer to the control system personalization features setting. (See CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE.)