id0914004496z6

1.Fully lower the driver-side door glass.

2.Connect the M-MDS to the DLC-2.

acxuuw00003251

3.Pull out the M-MDS cable from the door glass opening and set the M-MDS outside the vehicle.

Caution

• Protect the cable and body contact area with a clean rag, otherwise they could be damaged.

4.After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• When using the IDS (laptop PC)

1. Select “Body”.

2. Select “Security”.

3. Select “PATS Functions”.

• When using the PDS (Pocket PC)

1. Select “All Tests and Calibrations”.

2. Select “PATS Functions”.

5.Then, select items from the screen menu in the following order.

1. Select “Advanced Key Code Erase and Program”

6.The security access begins and the M-MDS displays “OUT-CODE”.

Note

• When “OUT-CODE” is first displayed, turning the ignition switch from the LOCK to the ON position 5 times will change the “OUT-CODE”.

7.Input the “IN-CODE” that corresponds to the “OUT-CODE” displayed on the M-MDS screen.

8.Perform procedures according to the directions on the M-MDS screen.

9.If the advanced key needs to be reprogrammed, program it according to the instructions on the M-MDS screen.