THEFT-DETERRENT SIREN REMOVAL/INSTALLATION [WITH INTRUDER SENSOR]SM2446312
THEFT-DETERRENT SIREN REMOVAL/INSTALLATION [WITH INTRUDER SENSOR]

id0914008095b7

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)
(2)Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)
(3)Sub trunk box (See SUB TRUNK BOX REMOVAL/INSTALLATION.)
(4)Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)
(5)Trunk side upper trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

3.Remove in the order indicated in the table.

acxaaw00001093

1
Connector
2
Clip
3
Nut
4
Theft-deterrent siren

4.Install in the reverse order of removal.