id091500805000

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)A‐pillar lower trim (See A-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(2)A‐pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(3)Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(4)Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(5)B-pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(6)Front seat belt upper anchor installation bolt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(7)B‐pillar upper trim (See B-PILLAR UPPER TRIM REMOVAL/INSTALLATION.)

(8)Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(9)Sub trunk box (See SUB TRUNK BOX REMOVAL/INSTALLATION.)

(10)Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(11)Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

(12)C‐pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(13)D‐pillar trim (See D-PILLAR TRIM REMOVAL/INSTALLATION.)

(14)Map light (See MAP LIGHT REMOVAL/INSTALLATION.)

(15)Sunvisor (See SUNVISOR REMOVAL/INSTALLATION.)

(16)Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION.)

(17)Headliner (See HEADLINER REMOVAL/INSTALLATION.)

3.Disconnect the sunroof motor connector.

acxuuw00001228

4.Remove the screws, and then remove the sunroof motor.

5.Install in the reverse order of removal.

Note

• If the glass panel or the sunroof motor is moved with the sunroof motor removed, initial position setting of the sunroof motor will be required. Perform initial position setting referring to the Sunroof Motor Assembly Note. (See SUNROOF UNIT DISASSEMBLY/ASSEMBLY.)