id091600804400

1.Remove the fastener.

acxaaw00001225

2.Pull the side step molding front and remove clip A from the vehicle body.

3.Slide the side step molding front to the vehicle front and remove clip B from the side step molding front.

4.Remove the side step molding front.

5.Remove clips B from the body, then install it to the side step molding front.

6.Pull the side step molding and remove clip C and F from the vehicle body.

acxaaw00001226

7.Detach clip D using a tape-wrapped flathead screwdriver as shown in the figure.

8.Slide the side step molding to the vehicle rear and remove clips E from the side step molding.

9.Remove the side step molding.

10.Remove clips E from the body, then install it to the side step molding.