id091600804800

1.Fully open the front door glass.

2.Disconnect the negative battery cable.

3.Remove the inner garnish. (See INNER GARNISH REMOVAL/INSTALLATION.)

4.Remove the front door trim. (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

5.Remove the power outer mirror. (See POWER OUTER MIRROR SWITCH REMOVAL/INSTALLATION.)

6.Remove clip A using a protective tape-wrapped flathead screwdriver.

acxuuw00000888

7.Lift (partially peeling back) the front beltline molding in the direction of the arrow and then remove tabs B.

8.Remove the tab C.

9.Install in the reverse order of removal.