id091600805100

Warning

• Using a razor with bare hands can cause injury. Always wear gloves when using a razor.

1.Fully open the rear door glass.

2.Partially peel back the glass run channel.

3.Push tab A in the direction of the arrow and remove it.

acxwzw00001581

4.While cutting the double-sided adhesive tape using a screwdriver or a razor, separate the rear sash molding from the body.

5.Push tab B in the direction of the arrow and remove it.

6.Remove the tab C.

7.Rotate the rear sash molding in the direction of the arrow and remove tab D.

8.Remove the rear sash molding.