id091600805200

1.Partially peel back the glass run channel.

2.Partially peel back the door weatherstrip.

3.Remove the following parts:

(1)Inner garnish (See INNER GARNISH REMOVAL/INSTALLATION.)

(2)Front door trim (See FRONT DOOR TRIM REMOVAL/INSTALLATION.)

(3)Rear door trim (See REAR DOOR TRIM REMOVAL/INSTALLATION.)

(4)Front beltline molding (See FRONT BELTLINE MOLDING REMOVAL/INSTALLATION.)

(5)Rear beltline molding (See REAR BELTLINE MOLDING REMOVAL/INSTALLATION.)

(6)Front sash molding (See FRONT SASH MOLDING REMOVAL.)

(7)Rear sash molding (See REAR SASH MOLDING REMOVAL.)

(8)Sail garnish (See SAIL GARNISH REMOVAL/INSTALLATION.)

(9)Rear door garnish (See REAR DOOR GARNISH REMOVAL/INSTALLATION.)

4.Peel off the door sash film by pulling it outward from one end.

acxuuw00000914

Note

• Slowly remove the door sash film since it may tear easily.