id091700801900

1.Partially peel back the seaming welt.

2.Pull the A-pillar trim shown in the figure in the direction of the arrow, raise clip B from its grommet together with the A-pillar trim, and remove clips A at the same time.

acxuuw00002600

3.Slide the A-pillar trim in the direction of the arrow shown in the figure and remove the A-pillar trim from clip B.

acxuuw00002601

4.Rotate and pull clip B in the direction of the arrow shown in the figure until it is no longer loose, and feels tight.

ac9uuw00002635

5.Pull clip B and remove it from the grommet.

6.Insert a tape-wrapped flathead screwdriver between the body and the grommet.

acxuuw00002591

7.Press the tabs and remove the grommet.

8.Install the new grommet to the body.

9.Install the new clip B to the A-pillar trim.

10.Install the A-pillar trim.