id091700802100

1.Remove the following parts:

(1)Front seat belt upper anchor installation bolt (See FRONT SEAT BELT REMOVAL/INSTALLATION.)

(2)Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(3)Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(4)B‐pillar lower trim (See B-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

2.Partially peel back the seaming welt.

acxuuw00000680

3.Remove the screw.

4.Pull the B-pillar upper trim outward and detach clip A and locator pin B.

5.Pull the B-pillar upper trim downward and detach the tabs and clip C.

6.Remove the B-pillar upper trim.

7.Turn the clip C installed on the body 90° in the direction indicated by the arrow in the figure and pull them out.

acxuuw00002236

8.Remove clip C from the body, then install it to the B-pillar upper trim.

9.Install in the reverse order of removal.