id091700802200

1.Remove the following parts:

(1)Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(2)Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(3)Sub trunk box (See SUB TRUNK BOX REMOVAL/INSTALLATION.)

(4)Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(5)Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

2.Partially peel back the seaming welt.

3.Remove the screw.

acxuuw00000681

4.Pull the C-pillar trim outward and detach clip A and pins B, C.

5.Pull the C-pillar trim downward and detach the tabs and clip D.

6.Remove the C-pillar trim.

7.Turn the clip D installed on the body 90° in the direction indicated by the arrow in the figure and pull them out.

acxuuw00002259

8.Remove clip D from the body, then install it to the C-pillar trim.

9.Install in the reverse order of removal.