id091700802300

1.Remove the following parts:

(1)Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(2)Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(3)Sub trunk box (See SUB TRUNK BOX REMOVAL/INSTALLATION.)

(4)Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(5)Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

2.Partially peel back the seaming welt.

3.Remove the fastener.

acxaaw00001543

4.Pull the D-pillar trim outward and detach clips A and pin B.

5.Pull the D-pillar trim upward and detach hook C.

6.Remove the D-pillar trim.

7.Install in the reverse order of removal.