id091700802600

1.Disconnect the negative battery cable.

2.Remove the sail garnish. (See SAIL GARNISH REMOVAL/INSTALLATION.)

3.Remove the covers.

acxuuw00000863

4.Remove the screws.

5.Detach clips A from the door trim using fastener remover.

6.Pull the door trim upward and detach tabs B from the door.

Caution

• Remove the rear door trim being careful not to scratch areas C of the sash film.

7.Disconnect the power window subswitch connector.

8.Remove the inner handle cover.

acxaaw00001336

9.Remove the rear door trim.

10.Install in the reverse order of removal.