id091700804700

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)A-pillar lower trim (driver’s side) (See A-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(2)A-pillar trim (driver’s side) (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(3)Front scuff plate inner (driver’s side) (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(4)Front side trim (driver’s side) (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(5)Brake boot (MTX) (See CONSOLE REMOVAL/INSTALLATION.)

(6)Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION.)

(7)Shift lever knob (MTX) (See SHIFT MECHANISM REMOVAL/INSTALLATION [A26MX-R].)

(8)Console (See CONSOLE REMOVAL/INSTALLATION.)

(9)Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)

(10)Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

(11)Meter hood (See METER HOOD REMOVAL/INSTALLATION.)

(12)Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

(13)Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(14)Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

3.Remove the screws.

L.H.D.

acxuuw00000882

R.H.D.

acxaaw00000093

4.Pull the dashboard garnish outward and detach clips A.

5.Install in the reverse order of removal.