id091800800000

1.Disconnect the negative battery cable.

2.Remove the front bumper. (See FRONT BUMPER REMOVAL/INSTALLATION.)

3.Remove in the order indicated in the table.

acxuuw00001693

4.Install in the reverse order of removal.(See Front combination light installation note.)

5.Adjust the headlight aiming. (See HEADLIGHT AIMING.)

Front combination light installation note

Caution

• When replacing the front combination light, refer to the following disassembly figure and verify that parts are assembled correctly. If a part has not been assembled correctly, it could cause problems such as water leakage or fogging in the housing.

Halogen type

acxwzw00002181

Discharge type

acxwzw00002182

Note

• Parts necessary for assembly vary depending on the vehicle's manufacturing period and specifications.