id091800800300

1.Disconnect the negative battery cable. (See BATTERY REMOVAL/INSTALLATION [L3 Turbo].) (See BATTERY REMOVAL/INSTALLATION [MZR-CD 2.2].)

2.Disconnect the back-up light switch connector. (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [A26MX-R (L3 Turbo)].) (See BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION [A26MX-R (MZR-CD 2.2)].)

3.Verify that the continuity between the back-up light switch terminals is as indicated in the table.

acxaaw00001096

• If not as indicated in the table, replace the back-up light switch.

acxaaw00001097