id092000801600

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)Rear scuff plate inner (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(2)Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(3)Sub trunk box (See SUB TRUNK BOX REMOVAL/INSTALLATION.)

(4)Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(5)Trunk side trim (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

(6)C‐pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION.)

(7)D‐pillar trim (See D-PILLAR TRIM REMOVAL/INSTALLATION.)

(8)Assist handle (See ASSIST HANDLE REMOVAL/INSTALLATION.)

3.Partially peel back the headliner.

4.Remove in the order indicated in the table.

acxuuw00002735

5.Install in the reverse order of removal.

6.After installation, verify that the rubber of the center roof antenna is installed to the roof panel with no space between them.