id092000812200

L.H.D.

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)Detraction panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(2)Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(3)Audio unit (with audio system) (See AUDIO UNIT REMOVAL/INSTALLATION.)

(4)Car-navigation unit (without integrated multi information display) (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)

(5)Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(6)A-pillar lower trim (RH) (See A-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(7)A-pillar trim (RH) (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

3.Disconnect the antenna feeder No.2. (See ANTENNA FEEDER NO.2 REMOVAL/INSTALLATION.)

4.Remove the clips A and B.

5.Remove the antenna feeder No.1.

6.Install in the reverse order of removal.

acxuuw00003481

R.H.D.

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)Brake boot (MTX) (See CONSOLE REMOVAL/INSTALLATION.)

(2)Console panel (See CONSOLE PANEL REMOVAL/INSTALLATION.)

(3)Shift lever knob (MTX) (See SHIFT MECHANISM REMOVAL/INSTALLATION [A26MX-R].)

(4)Console (See CONSOLE REMOVAL/INSTALLATION.)

(5)Front scuff plate inner (See FRONT SCUFF PLATE REMOVAL/INSTALLATION.)

(6)Front side trim (See FRONT SIDE TRIM REMOVAL/INSTALLATION.)

(7)Dashboard under cover

(8)Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

(9)Bonnet release lever (See BONNET LATCH AND RELEASE LEVER REMOVAL/INSTALLATION.)

(10)Lower panel (See LOWER PANEL REMOVAL/INSTALLATION.)

(11)Decoration panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(12)Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(13)Audio unit (See AUDIO UNIT REMOVAL/INSTALLATION.)

(14)Climate control unit (See CLIMATE CONTROL UNIT REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER].) (See CLIMATE CONTROL UNIT REMOVAL [MANUAL AIR CONDITIONER].)

(15)Meter hood (See METER HOOD REMOVAL/INSTALLATION.)

(16)Column cover (See COLUMN COVER REMOVAL/INSTALLATION.)

(17)Instrument cluster (See INSTRUMENT CLUSTER REMOVAL/INSTALLATION.)

(18)Driver-side air bag module (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION.)

(19)Steering wheel (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)

(20)Combination switch (See COMBINATION SWITCH REMOVAL/INSTALLATION.)

(21)Steering shaft (See STEERING WHEEL AND COLUMN REMOVAL/INSTALLATION.)

(22)A-pillar lower trim (See A-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(23)A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(24)Dashboard (See DASHBOARD REMOVAL/INSTALLATION.)

3.Remove the clips A and B.

4.Remove the antenna feeder No.1.

5.Install in the reverse order of removal.

acxwzw00001401