id092000812400

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)Detraction panel (See DECORATION PANEL REMOVAL/INSTALLATION.)

(2)Center panel (See CENTER PANEL REMOVAL/INSTALLATION.)

(3)Audio unit (with audio system) (See AUDIO UNIT REMOVAL/INSTALLATION.)

(4)Car-navigation unit (without integrated multi information display) (See CAR-NAVIGATION UNIT REMOVAL/INSTALLATION.)

(5)A-pillar lower trim (RH) (See A-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(6)A-pillar trim (RH) (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

3.Disconnect the antenna feeder No.2.

acxuuw00003482

4.Verify that the continuity between antenna feeder No.1 terminals is as indicated in the table.

acxuuw00003483

• If not as indicated in the table, replace antenna feeder No.1.

acxuuw00003485