id092000812500

1.Disconnect the negative battery cable.

2.Remove the following parts:

(1)A‐pillar lower trim (RH) (See A-PILLAR LOWER TRIM REMOVAL/INSTALLATION.)

(2)A‐pillar trim (RH) (See A-PILLAR TRIM REMOVAL/INSTALLATION.)

(3)Rear scuff plate inner (RH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION.)

(4)Rear seat (See REAR SEAT REMOVAL/INSTALLATION.)

(5)Sub trunk box (See SUB TRUNK BOX REMOVAL/INSTALLATION.)

(6)Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION.)

(7)Trunk side trim (RH) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION.)

(8)D‐pillar trim (RH) (See D-PILLAR TRIM REMOVAL/INSTALLATION.)

3.Disconnect the antenna feeder No.1.

acxuuw00003530

4.Disconnect the antenna feeder No.3.

acxuuw00003531

5.Verify that the continuity between antenna feeder No.2 terminals is as indicated in the table.

acxuuw00003490

• If not as indicated in the table, replace antenna feeder No.2.

acxuuw00003491