id092000813100

1.Disconnect the negative battery cable.

2.Remove the liftgate upper trim. (See LIFTGATE UPPER TRIM REMOVAL/INSTALLATION.)

3.Disconnect the connector A.

acxwzw00001184

4.Disconnect the connector B. (See Connector B Removal Note.)

5.Remove the clip.

6.Remove the bolt.

7.Remove the antenna feeder No.4.

8.Install in the reverse order of removal.

Connector B Removal Note

1.Remove the connector B in the direction of the arrow (2) shown in the figure while pressing the glass antenna terminal in the direction of the arrow (1).

acxwzw00001185