id092200801800

1.Move the float to the topmost and bottommost positions, and verify that the resistance between terminals A and C (fuel gauge sender unit (main)) or A and B (fuel gauge sender unit (sub)) of the unit and the position of the float are as indicated in the figure.

acxwzw00001351

• If they are not as indicated, replace the fuel gauge sender unit or fuel gauge sender sub-unit. (See FUEL GAUGE SENDER UNIT REMOVAL/INSTALLATION [L5, L3 Turbo].) (See FUEL GAUGE SENDER UNIT REMOVAL/INSTALLATION [MZR-CD 2.2].)