CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURESM2446571
CONTROL SYSTEM PERSONALIZATION FEATURES SETTING PROCEDURE

id094000439800

Note
• Use the IDS (laptop PC) because the PDS (Pocket PC) does not support the PERSONALIZATION FEATURES SETTING PROCEDURE.

1.Connect the M-MDS (IDS) to the DLC-2.
acxwzw00001649

2.After the vehicle is identified, select the following items from the initial screen of the M-MDS.

• When using the IDS (laptop PC)
1. Select the “Module Programming”.

3.Then, select items from the screen menu in the following order.

1. Select “Programmable Parameters”.
2. Select “Personality” or “Interior lighting” or “Washer/Wiper” or “Security” or “Power Windows”.

4.Select an item name, and then select option.


Items of “Personality”

European (L.H.D. U.K.) specs.

M-MDS display

Function

Initial setting

Setting content

Control unit
Smart turn
The turn light system Function can be set.
Enabled
Disabled / Enabled
BCM
Auto relock timer (without AKE)
Auto re-lock operation timing can be changed.
30sec
30sec / 60sec / 90sec
BCM
Answer feed back (hazard)
Answer back hazard can be set to inoperable.
Enabled
Disabled/ Enabled
BCM

Except European (L.H.D. U.K.) specs.

M-MDS display

Function

Initial setting

Setting content

Control unit
Smart turn
The turn light system Function can be set.
Disabled
Disabled / Enabled
BCM
Auto relock timer (without AKE)
Auto re-lock operation timing can be changed.
30sec
30sec / 60sec / 90sec
BCM
Answer feed back (hazard)
Answer back hazard can be set to inoperable.
Enabled
Disabled/ Enabled
BCM


Items of “Interior lighting”

M-MDS display

Function

Initial setting

Setting content

Control unit
Room lamp timer (when Doors closed)
The elapsed time between the doors closing and the interior light turning off can be adjusted.
15s
7.5s, 15s, 30s, 60s
BCM
Room lamp timer (when Doors unlocked)
The elapsed time between the doors unlocking and the interior light turning off can be adjusted.
30s
7.5s, 15s, 30s, 60s
BCM
Auto room lamp (when IG-Off)
The automatic illumination function of the interior light after the ignition is switched off can be canceled.
Enabled
Disabled / Enabled
BCM
Room Lamp Battery Saver Timer
The elapsed time for the interior light to automatically turn off when a door is ajar can be adjusted.
30min
60min / 30min/ 10min
BCM
Room Lamp Battery Saver
The automatic illumination function of the interior light to automatically turn off can be canceled.
Enabled
Disabled / Enabled
BCM


Items of “Washer/Wiper”

M-MDS display

Function

Initial setting

Setting content

Control unit
Rear wiper interlocked to window washer switch
The wiper action in conjunction with the rear washer operation can be canceled.
Enabled
Disabled / Enabled
BCM


Items of “Security”

Except European (L.H.D. U.K.) specs.

M-MDS display

Function

Initial setting

Setting content

Control unit
Burglar alarm start up method
Theft-deterrent system start up method can be changed.
Enabled
Disabled/ Enabled
BCM


Items of “Power Windows”

M-MDS display

Function

Initial setting

Setting content

Control unit
Window closing with Advanced-key/Transmitter
Exterior close function can be set.
(With advanced key/transmitter)
Enabled
Disabled / Enabled
BCM
Window opening with Advanced-key/Transmitter
Exterior open function can be set.
(With advanced key/transmitter)
Enabled
Disabled / Enabled
BCM
Window closing/opening with Request switch
Exterior open/close function can be set.
(With request switch)
Enabled
Disabled / Enabled
BCM