FUEL PUMP RESISTOR REMOVAL/INSTALLATION [L3 Turbo]

id0114b4801200

1.  Disconnect the negative battery cable.

2.  Remove the air cleaner. (See INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [L3 Turbo].)

3.  Disconnect the fuel pump resistor connector.

acxuuw00002402

4.  Remove in the fuel pump resistor.

5.  Install in the order as shown in the figure.

acxuuw00002403

Tightening torque
4.2—6.2 N·m {43—63 kgf·cm, 38—54 in·lbf}

6.  Connect the fuel pump resistor connector.