REAR WHEEL ALIGNMENT

id021100800300

Rear wheel alignment (Unloaded)*1

Item

Fuel gauge indication

Empty

1/4

1/2

3/4

Full
Total toe-in
[Tolerance ±4 {±0.16}]
(mm {in})
2 {0.08}
(degree)
0°09′±0°18′
Camber angle*2 (Reference value)
[Tolerance ±1°]
−0°51′
−0°54′
−0°57′
−1°00′
−1°03′
Thrust angle (Reference value) [Tolerance ±0°48′]
0°

*1  :Engine coolant and engine oil are at specified level. Spare tire, jack and tools are in designated position.
*2  :Difference between left and right must not exceed 1°30′.
Note
Total toe-in measuring position
•  Tire: A indicated in the figure (between the center of the tires)
acxuuw00001034
•  Rim inner: B indicated in the figure (between the inner side of the rims)

Total Toe-in Adjustment

1.  Loosen the securing nut of the adjusting cam bolt.

2.  Rotate the adjusting cam bolt in either direction to adjust the toe-in.

acxuuw00001035

 

Left wheel

Right wheel
Toe-out direction
Counterclockwise
Clockwise
Toe-in direction
Clockwise
Counterclockwise

3.  Tighten the nut.

Tightening torque
80—100 N·m {8.2—10.1 kgf·m, 59.1—73.7 ft·lbf}