PROPELLER SHAFT INSPECTION

id031500800500

1. Measure the propeller shaft center runout using the dial gauge.

acxuuw00000573

• If it exceeds the maximum specification, replace the propeller shaft as a single component.

Maximum propeller shaft runout

0.8 mm {0.031 in}

2. Inspect the play and rotation of the joint by turning the universal joint in the directions shown by the arrows.

ampjjw00002749

• If it is not within the specification, replace the propeller shaft.

Propeller shaft starting torque

0.29—1.47 N·m {3.0—14.9 kgf·cm, 2.6—13.0 in·lbf}