TRANSFER OIL SEAL REPLACEMENT [AW6AX-EL]

id0316d6800400

1.  On level ground, jack up the vehicle and support it evenly on safety stands.

2.  Drain the oil from the transfer. (See TRANSFER OIL REPLACEMENT [AW6AX-EL].)

3.  Remove the joint shaft. (See JOINT SHAFT REMOVAL/INSTALLATION [4WD])

4.  Remove the oil seals using a screwdriver.

5.  Using the SST and a hammer, tap each new oil seal.

acxuuw00002271

Substitution SST

•  49 T034 201A

Outer diameter: 59—64 mm {2.33—2.51 in}

Inner diameter: 55 mm {2.17 in} or more

Plate thickness: 2 mm {0.08 in} or more

Length: 5 mm {0.20 in} or more

6.  Coat the lip of each oil seal with transfer oil.

7.  Install the joint shaft. (See JOINT SHAFT REMOVAL/INSTALLATION [4WD])

8.  Add the specified amount and type of oil. (See TRANSFER OIL REPLACEMENT [AW6AX-EL].)