4WD CONTROL MODULE REMOVAL/INSTALLATION

id031800806000

1.  Disconnect the negative battery cable.

2.  For L.H.D., remove the lower panel (Driver side). (See LOWER PANEL REMOVAL/INSTALLATION.)

3.  For R.H.D., remove the dashboard under cover.

4.  For R.H.D., remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION.)

5.  Remove in the order indicated in the table.

6.  Install in the reverse order of removal.

acxuuw00001972

1	Bolt
2	4WD CM (See 4WD CM Removal Note.)
3	Connector

4WD CM Removal Note

1.  Push up the 4WD CM slightly, and remove it.

acxaaw00000329