DRIVELINE/AXLE TECHNICAL DATA
id035000800100
Front and rear axle
|
Item |
Specification |
|---|---|
|
Front wheel bearing maximum play
|
0.05 mm {0.002 in}
|
|
Rear wheel bearing maximum play
|
0.05 mm {0.002 in}
|
Drive shaft
|
Item |
Specification |
|---|---|
|
Front drive shaft length (double offset joint)
|
LH: 679.9—689.9 mm {26.77—27.16 in}
RH: 623.6—633.6 mm {24.56—24.94 in}
|
|
Front drive shaft length (tripod joint)
|
LH: 658.2—668.2 mm {25.92—26.30 in}
RH: 621.2—631.2 mm {24.46—24.85 in}
|
|
Rear drive shaft length
|
LH: 840.8—850.8 mm {33.11—33.49 in}
RH: 862.3—872.3 mm {33.95—34.34 in}
|
Differential
|
Item |
Specification |
|---|---|
|
Rear differential oil
|
Specified oil grade: API service GL-5
Specified oil viscosity: SAE 80W-90
Capacity (approximate quantity): 1.00 L {1.06 US qt, 0.88 Imp qt}
|
|
Rear differential backlash of pinion gear and side gear
|
0.1 mm {0.004 in} or less
|
|
Rear differential pinion height
|
–0.032—0.032 mm {–0.0012—0.0012 in}
|
|
Rear differential drive pinion preload
|
1.3—1.8 N·m {13.3—18.2 kgf·cm, 11.5—15.9 in·lbf}
|
|
Rear differential backlash of drive pinion and ring gear
|
Standard: 0.09—0.11 mm {0.003—0.004 in}
Minimum value: 0.05 mm {0.002 in}
|
Propeller shaft
|
Item |
Specification |
|---|---|
|
Propeller shaft maximum runout
|
0.8 mm {0.031 in}
|
|
Propeller shaft starting torque
|
0.29—1.47 N·m {3.0—14.9 kgf·cm, 2.6—13.0 in·lbf}
|
Transfer [A26MX-R, AW6AX-EL]
|
Item |
Specification |
|---|---|
|
Transfer oil
|
Specified oil grade: API Service GL-5
Specified oil viscosity: SAE 80W-90
Capacity (approximate quantity): 1.2 L {1.3 US qt, 1.1 lmp qt}
|