DTC DISPLAY

id070200801500

1.  Connect the M-MDS to the DLC-2 connector.

L.H.D.

acxaaw00000833

R.H.D.

acxaaw00000263

2.  Expose the solar radiation sensor to natural sunlight.

Note

•  If natural sunlight is not shone on the solar radiation sensor, the climate control unit determines a malfunction and indicates DTC “B1260, B1261”.

3.  After the vehicle is identified, select the following items from the initial screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select the “Self Test”.

2.  Select the “Modules”.

3.  Select the “EATC”.

•  When using the PDS (Pocket PC)

1.  Select “Module Tests”.

2.  Select the “EATC”.

3.  Select the “Self Test”.

4.  Verify the DTC according to the directions on the screen.

•  If any DTCs are displayed, perform troubleshooting according to the corresponding DTC inspection.

5.  After completion of repairs, clear all DTCs stored in the climate control unit. (See CLEARING DTC.)