REFRIGERANT PRESSURE SWITCH REMOVAL/INSTALLATION [MANUAL AIR CONDITIONER]

id0740a2802600

1.  Disconnect the negative battery cable.

2.  Discharge the refrigerant from the system. (See REFRIGERANT RECOVERY.) (See REFRIGERANT CHARGING.)

3.  Loosen the refrigerant pressure switch using two spanners.

4.  Remove in the order indicated in the table.

acxuuw00001571

1	Refrigerant pressure switch connector
2	Refrigerant pressure switch (See Refrigerant Pressure Switch Installation Note.)

5.  Install in the reverse order of removal.

6.  Perform the refrigerant system performance test. (See REFRIGERANT SYSTEM PERFORMANCE TEST.)

Refrigerant Pressure Switch Installation Note

1.  Apply compressor oil to O-ring and connect the joint.