DTC B2477 [BCM]

id0902f5854000

DTC B2477

Module configuration failure
DETECTION CONDITION
BCM data configuration error
POSSIBLE CAUSE
•  Configuration has not been completed.
•  BCM malfunction

Diagnostic procedure

STEP

INSPECTION

ACTION
1
INSPECT DTC
•  Clear the DTC from the BCM memory using the M-MDS.
•  Turn the ignition switch to LOCK position then ON position.
•  Is the same DTC present?
Yes
Perform BCM configuration procedure.
(See BODY CONTROL MODULE (BCM) CONFIGURATION [European (L.H.D. U.K.) specs.].)
Go to the next step.
No
Go to the next step.
2
VERIFY TROUBLESHOOTING COMPLETED
•  Clear the DTC from the BCM memory using the M-MDS.
•  Turn the ignition switch to LOCK position then ON position.
•  Is the same DTC present?
Yes
Replace the BCM.
(See BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION.)
No
DTC troubleshooting completed.