STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [AUDIO]

id0902f6803700

Note

•  All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

1.  Turn the ignition switch to the ACC or ON position.

2.  Turn the POWER switch off.

3.  While pressing the POWER button, simultaneously press the CLOCK button and the MEDIA button for 2 s or more.

European (L.H.D. U.K.), General (R.H.D.) specs.

acxaaw00001158

Australian specs.

acxaaw00000526

Note

•  If several DTCs are in the memory, they can be displayed using the SEEK button (up or down).

4.  To stop the on-board diagnostic test mode, turn the ignition switch off.