SIDE STEP MOLDING REMOVAL

id091600804400

1.  Remove the fastener.

acxaaw00001225

2.  Pull the side step molding front and remove clip A from the vehicle body.

3.  Slide the side step molding front to the vehicle front and remove clip B from the side step molding front.

4.  Remove the side step molding front.

5.  Remove clips B from the body, then install it to the side step molding front.

6.  Pull the side step molding and remove clip C and F from the vehicle body.

acxaaw00001226

7.  Detach clip D using a tape-wrapped flathead screwdriver as shown in the figure.

8.  Slide the side step molding to the vehicle rear and remove clips E from the side step molding.

9.  Remove the side step molding.

10.  Remove clips E from the body, then install it to the side step molding.