 |
acxuuw00002099
STEERING LOCK UNIT INSPECTION
id092100800500
1. Measure the voltage or inspect for continuity according to the Terminal Voltage Table (Reference).
2. If the system does not work properly even though the inspection items or related wiring harnesses do not have any malfunction, replace the steering look unit.
Terminal Voltage Table (Reference)
acxuuw00002099
|
|
Terminal |
Signal name |
Connected to |
Measured condition |
Voltage (V)/Continuity |
Inspection item(s) |
|---|---|---|---|---|---|
|
E
|
Push switch signal
|
Keyless control module
|
Start knob pressed
|
B+
|
• Keyless control module
• Related wiring harnesses
|
|
Start knob released
|
1.0 or less
|
||||
|
F
|
Power supply
|
Fuse
|
Under any condition
|
B+
|
• Fuse
• Related wiring harnesses
|
|
G
|
Key reminder switch signal
|
Keyless control module
|
Key inserted
|
B+
|
• Keyless control module
• Related wiring harnesses
|
|
Key removed
|
1.0 or less
|
||||
|
I
|
Power supply
|
Fuse
|
Under any condition
|
B+
|
• Fuse
• Related wiring harnesses
|
|
K
|
Serial communication
|
Keyless control module
|
Because this terminal is for communication, good/no good judgment by terminal voltage is not possible.
|
Related wiring harnesses
|
|
|
L
|
GND
|
Body ground
|
Under any condition
|
1.0 or less
|
Related wiring harnesses
|