CENTER PILLAR REMOVAL [PANEL REPLACEMENT]

id098008743900

1.  Rough cut area (A), drill the 57 locations indicated by (B), then remove the center pillar (outer).

acxaab00000046

2.  Rough cut area (C), drill the 3 locations indicated by (D).

Caution

•  Avoid cutting with a blow torch or similar tools as the insulator (shaded area) is flammable.

3.  Drill the 3 locations indicated by (E) from the interior.

4.  Remove the center pillar inner reinforcement.

acxaab00000047

5.  Rough cut area (F), drill the 2 locations indicated by (G), then remove the center pillar (inner).

acxaab00000048