ON-BOARD DIAGNOSTIC SYSTEM PID/DATA MONITOR FUNCTION

id030200108400

• The parameter identification (PID)/data monitor function is used for optionally selecting input/output signal monitor items preset in the all-wheel drive (4WD) control module (CM) and reading them out in real-time.

PID/data monitor table

—: Not applicable

Monitor item	Unit/Operation	Definition
M-MDS display	Unit/Operation	Definition
AAT	°C, °F	This PID indicates ambient air temperature.
APP	%	This PID indicates accelerator pedal position.
CAL_TABLE	—	This PID indicates 4WD control module calibration table.
CUP_SOL	%	This PID indicates 4WD solenoid duty cycle.
GEAR	1st/2nd/3rd/4th/5th/6th/7th/Park/Neutral/Drive/Reverse	This PID indicates gear position.
OIL_TEMP	°C, °F	This PID indicates differential oil temperature.
RPM	RPM	This PID indicates engine speed.
SHIFT	P/R/N/D/S/L	This PID indicates select lever position.
TORQUE	Nm	This PID indicates total wheel torque.
VPWR	V	This PID indicates power supply voltage for 4WD control module.
WARN_LAMP	OFF/ON/Blinking	This PID indicates 4WD warning indication status.
WSPD_LF	KPH, MPH	This PID indicates vehicle speed.
WSPD_LR	KPH, MPH	This PID indicates vehicle speed.
WSPD_RF	KPH, MPH	This PID indicates vehicle speed.
WSPD_RR	KPH, MPH	This PID indicates vehicle speed.