PID/DATA MONITOR TABLE [SAS CONTROL MODULE (ACTIVE BONNET)]

id0802h4081000

PID

Unit/Condition

Data contents

SAS control module terminal

PCD_A

(Poorly connected detector bar terminal voltage nominal (SAS control module connector A))

V

•  Normal connected: 0.27 V or less

•  Poor connected: 3.17 V or more

1a, 1b

PCD_B

(Poorly connected detector bar terminal voltage nominal (SAS control module connector B))

V

•  Normal connected: 0.27 V or less

•  Poor connected: 3.17 V or more

2a, 2b

PCD_C

(Poorly connected detector bar terminal voltage nominal (SAS control module connector C))

V

•  Normal connected: 0.27 V or less

•  Poor connected: 3.17 V or more

3a, 3b

VPWR_IGA

(SAS control module power voltage)

V

Ignition is switched ON: IG1 voltage

2AD

WLAMP_ST

(Active bonnet warning light status)

Lamp_Off/Lamp_On/Plant_Mode/Unknown

•  Active bonnet warning light off: Lamp_Off

•  Active bonnet warning light on : Lamp_On

•  Active bonnet warning light flashing: Plant_Mode

•  Active bonnet warning light unrecognized: Unknown

3Q, 3S

PID	Unit/Condition	Data contents	SAS control module terminal
PCD_A (Poorly connected detector bar terminal voltage nominal (SAS control module connector A))	V	• Normal connected: 0.27 V or less • Poor connected: 3.17 V or more	1a, 1b
PCD_B (Poorly connected detector bar terminal voltage nominal (SAS control module connector B))	V	• Normal connected: 0.27 V or less • Poor connected: 3.17 V or more	2a, 2b
PCD_C (Poorly connected detector bar terminal voltage nominal (SAS control module connector C))	V	• Normal connected: 0.27 V or less • Poor connected: 3.17 V or more	3a, 3b
VPWR_IGA (SAS control module power voltage)	V	Ignition is switched ON: IG1 voltage	2AD
WLAMP_ST (Active bonnet warning light status)	Lamp_Off/Lamp_On/Plant_Mode/Unknown	• Active bonnet warning light off: Lamp_Off • Active bonnet warning light on : Lamp_On • Active bonnet warning light flashing: Plant_Mode • Active bonnet warning light unrecognized: Unknown	3Q, 3S