DTC U0001:88/U0100:00/U0101:00/U0155:00/U0214:00 [POWER LIFTGATE (PLG) CONTROL MODULE]

id0902o8082100

Description	•  U0001:88 ―  Module communication error (HS-CAN) •  U0100:00 ―  Communication error with PCM •  U0101:00 ―  Communication error with TCM •  U0155:00 ―  Communication error with instrument cluster •  U0214:00 ―  Communication error with start stop unit
Detection condition	•  U0001:88 ―  Power liftgate (PLG) control module detects a CAN bus communication line (HS-CAN) malfunction. •  U0100:00 ―  Power liftgate (PLG) control module cannot receive the CAN signal from the PCM for 5 s or more with the ignition switched ON (engine off or on). •  U0101:00 ―  Power liftgate (PLG) control module cannot receive the CAN signal from the TCM for 5 s or more with the ignition switched ON (engine off or on). •  U0155:00 ―  Power liftgate (PLG) control module received a signal which indicates the instrument cluster configuration is not performed for 5 s or more with the ignition switched ON (engine off or on). •  U0214:00 ―  Power liftgate (PLG) control module cannot receive the CAN signal from the start stop unit.
Fail-safe function	•  U0001:88 ―  Stops the power liftgate (PLG) system operation. •  U0100:00 ―  Stops the power liftgate (PLG) system operation. •  U0101:00 ―  Stops the power liftgate (PLG) system operation. •  U0155:00 ―  Stops the power liftgate (PLG) system operation. •  U0214:00 ―  Stops the power liftgate (PLG) system operation.
Possible cause	•  Malfunction in CAN bus communication line •  Malfunction in CAN line between PCM and power liftgate (PLG) control module •  Malfunction in CAN line between TCM and power liftgate (PLG) control module •  Malfunction in CAN line between instrument cluster and power liftgate (PLG) control module •  Malfunction in CAN line between start stop unit and power liftgate (PLG) control module
System wiring diagram	Not applicable

Diagnostic Procedure