GPS ANTENNA INSPECTION

id092000822200

Note

•  The integrity of the GPS antenna cannot be determined from a single part. When inspecting the GPS antenna, perform the following procedure.

1.  Connect the M-MDS to the DLC-2.

2.  Perform the DTC inspection for the connectivity master unit (CMU) and verify if any DTCs related to the GPS antenna is detected. (See DTC INSPECTION [CONNECTIVITY MASTER UNIT].)

•  If DTCs are detected, repair the malfunctioning location according to the applicable DTC troubleshooting. (See DTC INSPECTION [CONNECTIVITY MASTER UNIT].)

•  If DTCs are not detected, repair the malfunctioning location according to the symptom troubleshooting. (See SYMPTOM TROUBLESHOOTING [ENTERTAINMENT SYSTEM [WITH CENTER DISPLAY]].)