D-PILLAR REINFORCEMENT (LOWER) REMOVAL [PANEL REPLACEMENT]


id098008829300


Symbol Mark

ac8wzb00000212

Removal Procedure

1.  Drill the spot welds in the 27 locations in area A shown in the figure.

2.  Drill the spot welds in the 5 locations in area B shown in the figure.

Note
•  When drilling the spot welds in the 5 locations in area B shown in the figure, do not drill through-holes in consideration of the workability when installing.

3.  Use the scissors and cut the insulator.

ac8wzb00000292

4.  Remove the D pillar reinforcement (lower).