i-ACTIVSENSE PERSONALIZATION FEATURES SETTING PROCEDURE

id152000001200

Caution

• The personalization feature may not be set correctly if [Not Adopted.] or [Not equipped] is selected in the setting displayed on the M-MDS. Do not select [Not Adopted.] or [Not equipped] in the setting displayed on the M-MDS.

Distance Recognition Support System (DRSS)

Using center display

• For the setting procedure of the personalization features using the center display, refer to "CENTER DISPLAY PERSONALIZATION FEATURES". (See CENTER DISPLAY PERSONALIZATION FEATURES SETTING PROCEDURE.)

Smart City Brake Support [Reverse] (SCBS R)

Using center display

Smart Brake Support (SBS) / Advanced Smart City Brake Support (Advanced SCBS)

Using M-MDS (IC)

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming”

(2) “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

SBS Volume.

The volume of the smart brake support (SBS) warning alarm can be changed.

High

OFF / Low / High

Instrument cluster

M-MDS display	Function	Initial setting	Setting contents	Control unit
SBS Volume.	The volume of the smart brake support (SBS) warning alarm can be changed.	High	OFF / Low / High	Instrument cluster

Using M-MDS (FSC)

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming”

(2) “Programmable Parameters”

3. Select menu in the “FSC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

SCBS Sensitibity

The distance at which the collision warning activates can be changed.

Medium

Long / Medium / Short

Forward sensing camera (FSC)

M-MDS display	Function	Initial setting	Setting contents	Control unit
SCBS Sensitibity	The distance at which the collision warning activates can be changed.	Medium	Long / Medium / Short	Forward sensing camera (FSC)

Using center display

Adaptive Front Lighting System (AFS)

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming”

(2) “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

Adaptive Front-lighting System

The adaptive front lighting system (AFS) can be switched between operable and inoperable.

ON

OFF / ON

Adaptive front lighting system (AFS) control module

M-MDS display	Function	Initial setting	Setting contents	Control unit
Adaptive Front-lighting System	The adaptive front lighting system (AFS) can be switched between operable and inoperable.	ON	OFF / ON	Adaptive front lighting system (AFS) control module

Using center display

Adaptive LED Headlights System

Using center display

Blind Spot Monitoring (BSM) System

Using M-MDS

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming”

(2) “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

BSM Volume.

The volume of the blind spot monitoring (BSM) warning alarm can be changed.

High

OFF / Low / High

Instrument cluster

M-MDS display	Function	Initial setting	Setting contents	Control unit
BSM Volume.	The volume of the blind spot monitoring (BSM) warning alarm can be changed.	High	OFF / Low / High	Instrument cluster

Using center display

Lane-keep Assist System / Lane Departure Warning System (LDWS)

Using M-MDS (FSC)

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming“

(2) “Programmable Parameters”

3. Select menu in the “FSC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

LDWS Timing.

The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.

Medium

Adaptive / Early / Medium / Late

Forward sensing camera (FSC)

LDWS Warning.

The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.

Medium

Often / Medium / Rare

Forward sensing camera (FSC)

LDWS Alart

The operation of lane departure warning system (LDWS) can be turned off.

ON

OFF / ON

Forward sensing camera (FSC)

LDWS LKA MODE

The function of lane departure warning system (LDWS) / lane-keep assist system can be switched.

LKA

OFF / LKA / LDWS

Forward sensing camera (FSC)

LKA Sensitibity

The operation timing of lane-keep assist system warning can be changed.

Medium

AUTO / Near / Medium / Far

Forward sensing camera (FSC)

LKA Sensitivity Cancel

The warning operation sensitivity of lane-keep assist system warning can be changed.

Med

HIGH / Medium High / Medium Low / LOW

Forward sensing camera (FSC)

LKA Alart

The operation of lane-keep assist system can be turned off.

ON

OFF / ON

Forward sensing camera (FSC)

M-MDS display	Function	Initial setting	Setting contents	Control unit
LDWS Timing.	The distance between the warning-trigger lines for the Lane Departure Warning System (LDWS) and vehicle lanes can be changed.	Medium	Adaptive / Early / Medium / Late	Forward sensing camera (FSC)
LDWS Warning.	The warning operation sensitivity of the lane departure warning system (LDWS) can be changed.	Medium	Often / Medium / Rare	Forward sensing camera (FSC)
LDWS Alart	The operation of lane departure warning system (LDWS) can be turned off.	ON	OFF / ON	Forward sensing camera (FSC)
LDWS LKA MODE	The function of lane departure warning system (LDWS) / lane-keep assist system can be switched.	LKA	OFF / LKA / LDWS	Forward sensing camera (FSC)
LKA Sensitibity	The operation timing of lane-keep assist system warning can be changed.	Medium	AUTO / Near / Medium / Far	Forward sensing camera (FSC)
LKA Sensitivity Cancel	The warning operation sensitivity of lane-keep assist system warning can be changed.	Med	HIGH / Medium High / Medium Low / LOW	Forward sensing camera (FSC)
LKA Alart	The operation of lane-keep assist system can be turned off.	ON	OFF / ON	Forward sensing camera (FSC)

Using M-MDS (Instrument cluster)

1. Connect the M-MDS to the DLC-2.

2. After vehicle identification, select the following from the M-MDS initialization screen.

(1) “Module programming”

(2) “Programmable Parameters”

3. Select menu in the “IC”.

4. Select an item name, and than select option.

M-MDS display

Function

Initial setting

Setting contents

Control unit

LDWS Sound.

The type of the lane departure warning sound can be changed.

Beep

Beep / Rumble Strip

Instrument cluster

LDWS Volume.

The volume of the lane departure warning alarm can be changed.

Volume1

Volume1 / Volume2 / Volume3

Instrument cluster

LKA Buzzer Sound Source

The system can be changed so that the steering wheel assist does not operate.

Vibration

No vibration / Vibration

Instrument cluster

M-MDS display	Function	Initial setting	Setting contents	Control unit
LDWS Sound.	The type of the lane departure warning sound can be changed.	Beep	Beep / Rumble Strip	Instrument cluster
LDWS Volume.	The volume of the lane departure warning alarm can be changed.	Volume1	Volume1 / Volume2 / Volume3	Instrument cluster
LKA Buzzer Sound Source	The system can be changed so that the steering wheel assist does not operate.	Vibration	No vibration / Vibration	Instrument cluster

Using center display

High Beam Control (HBC) System

Using center display

Driver Attention Alert

Using center display

Traffic Sign Recognition System (TSR)

Using center display

360°View Monitor System

Using center display