TCS OFF SWITCH INSPECTION [2WD]

id0415008031a1

Note
•  The TCS OFF switch is integrated into the cluster switch.
•  For the TCS OFF switch removal/installation, refer to the cluster switch removal/installation. (See CLUSTER SWITCH REMOVAL/INSTALLATION.)

1.  Remove the TCS OFF switch. (See TCS OFF SWITCH REMOVAL/INSTALLATION [2WD].)

2.  Verify that the resistance between the TCS OFF switch terminals B and C is as indicated in the table.

•  If not as indicated in the table, replace the TCS OFF switch.
ac8wzw00004883

TCS OFF switch specification

Terminal

Test condition

Resistance (ohms)
B—C
Switch pressed
83.66—85.34
Switch released
1139.99—1163.01

3.  Apply battery voltage to TCS OFF switch terminal J, and connect terminal I to ground.

4.  Verify that the LED illuminates.

•  If there is any malfunction, replace the TCS OFF switch.